Machine plastering across Latvia
We come with our own equipment, plaster your bare walls and ceilings and leave them straight, ready for skimming and painting.
Gypsumfor dry rooms
Lime-cementfor damp rooms
Knauf, Sakretcertified materials
Four steps, and one contact for the whole job.
Send the address, the approximate area in m² and a few photos of the walls.
We inspect the site, help you choose the plaster and prepare an estimate.
Our own plastering machine and certified Knauf and Sakret mixes.
On the agreed schedule. Afterwards we clean up the work area.
All the site needs: 3-phase power and water.
We'll help you choose the right material for your building.
10–12 €/m²labour, excl. material
A smooth, even finish for homes and commercial spaces.
Gypsum absorbs and releases moisture, helping keep a pleasant indoor climate.
Ideal for
12–14 €/m²labour, excl. material
A durable, moisture-resistant solution.
Withstands moisture, temperature swings and mechanical wear.
Ideal for
Already included in the price
The final price depends on the plaster thickness and whether it’s a new build or a renovation. No minimum order, and no extra charge for travel outside Riga. If you wish, we supply the material too.
Mechanical feed covers large areas in a short time.
The material mixes evenly, so the surface is strong, even and smooth.
A shorter job means lower labour costs and less material used.
New builds and renovations with a 3-phase power supply and running water.
On which walls
Photos from our sites, before skimming and painting.
Before and after
More photos
From the site visit to a clean work area.
We know machine plastering down to the finest detail and work to the highest building standards.
A private house in the countryside or a large commercial site in the city. No extra charge for travel outside Riga.
Gypsum and lime-cement mixes from leading manufacturers such as Knauf and Sakret.
Surface preparation and corner beads are already in the price. No minimum order.
Every client gets a specific completion date, and we guarantee our work.
We help you choose the best material for your building.
Didn't find your answer? Message us and we'll reply.
Ask on WhatsApp ›Gypsum plaster costs 10–12 €/m² and lime-cement plaster 12–14 €/m². The price is for labour, excluding material, and already includes priming the surface, corner beads, window junction tape and covering the windows with film. The final price depends on the plaster thickness and whether it’s a new build or a renovation.
Plaster that is mixed and applied with a plastering machine. The mechanical feed mixes the material evenly, so the wall comes out strong, even and smooth, and the work goes much faster than plastering by hand.
Gypsum plaster is for dry living and commercial spaces and helps keep a pleasant indoor climate. For bathrooms, garages, utility rooms and the inner side of façade walls we use durable, moisture-resistant lime-cement plaster. We will help you choose on site.
We work all over Latvia and in the nearby part of Lithuania. There’s no extra charge for travel outside Riga, and no minimum area or order value.
A typical private house usually takes 5–7 days. We take jobs in order: every client gets a specific start date and completion date.
Just a 3-phase power supply and running water. We bring our own equipment, and covering the windows with film is already included in the price. Sockets can be installed before or after plastering, whichever suits you.
Yes, we plaster both walls and ceilings, and corner beads are included in the price. We don’t do skimming or painting: we leave straight surfaces ready for that work.
Yes, as long as the air temperature in the room is at least +5 °C.
Drying time depends on the weather, the season and the thickness of the plaster.
Aerated concrete and expanded-clay blocks, brickwork, monolithic concrete and concrete panels, insulating blocks and other mineral substrates.
Yes, the consultation and estimate are free. It’s best done in person on site, but depending on the size and complexity of the project we can also do it remotely from photos and plans.
The full cycle: site visit and estimate, material delivery, plastering, and cleaning up the work area afterwards.
Certified gypsum and lime-cement mixes from leading manufacturers such as Knauf and Sakret. The material isn’t included in the labour price, but we can supply it if you wish.
Yes, we guarantee the work we do. Correctly applied gypsum or lime-cement machine plaster lasts for decades indoors, from 30 to 50+ years, and usually for the whole life of the building, as long as it isn’t mechanically damaged or exposed to moisture.
Send us the address and approximate area, and we'll arrange a site visit.
Message on WhatsApp